Skip to main content
Stesso

Reconnect Supply Line and Attach Bidet Hose to T-Valve

0:30
1:00
12.8K views

At 0:30 in

Easy Add On Sprayer Attachment For Toilet #plumbing #helpingothers #bidet

Watch on YouTube

What happens here

Now, reconnect the original flexible supply line that runs from your wall shut-off valve to the bottom threaded port of the newly installed T-valve. Hand-tighten it, then use an adjustable wrench for a snug fit. Next, take one end of the bidet sprayer hose (check for an internal gasket) and screw it onto the side outlet of the T-valve. Hand-tighten, then use a wrench to secure it.

Goal: Connect all water lines to the T-valve

Tools and materials

  • Adjustable Wrench — Tightening hose connections
  • Bidet Hose — Connecting the T-valve to the sprayer head
  • Toilet Supply Line — Connecting the wall valve to the T-valve

What they say

Hide

This valve, just make sure that gasket's on there. Make sure you don't cross-thread it, get it adjusted to where you want it, guess what happened in the front, and we'll tighten this. Screw the supply line back to the bottom of this one. Got the sprayer hose, you can see there's already a gasket inside there, and you're just going to go right here, tighten that bad puppy up. This side of the hose, and attach the sprayer head. Now we'll turn this one on, so we'll go ahead and turn it on. Everything's looking good, and your flex line is bad,

Auto-generated from the video audio.