Skip to main content
Stesso

Install the T-Valve

0:21
1:00
12.8K views

At 0:21 in

Easy Add On Sprayer Attachment For Toilet #plumbing #helpingothers #bidet

Watch on YouTube

What happens here

Take the new T-valve and ensure its rubber gasket is properly seated inside the top connection. Screw the top of the T-valve directly onto the bottom of the toilet's fill valve where you just removed the supply line. Be careful not to cross-thread the connection. Hand-tighten it first, then use an adjustable wrench to snug it up, positioning the side outlet of the T-valve in the direction you want the bidet hose to run, usually towards the front or side.

Goal: Integrate the bidet's water diversion valve into the toilet's supply

Tools and materials

  • Adjustable Wrench — Tightening the T-valve connection
  • On-Off Valve — Connecting to the toilet fill valve

What they say

Hide

First thing we're going to do is we're going to shut the water off. Disconnect the top of the supply line right here from bottom of the fill valve. This valve, just make sure that gasket's on there. Make sure you don't cross-thread it, get it adjusted to where you want it, guess what happened in the front, and we'll tighten this. Screw the supply line back to the bottom of this one. Got the sprayer hose, you can see there's already a gasket inside there, and you're just going to go right here, tighten that bad puppy up.

Auto-generated from the video audio.