Assemble Leg and Wheel Kits

accessories [Music] there you know this first time we have to put the legs on yeah and we'll never take them off again but we got a little bit of assembly and well we do have flow because some people will do this themselves right okay so they want it easy and when you get that big bag of hardware it can be like what do i even use yeah it goes there so with our instructions you know you go through step one step two we have this shrink wrap card step one here's the hardware you need step two follows the instructions and it keeps it really easy and it's one of those simple things that flow does but have this yeah so you get to step one and you know what stuff you need instead of a big you know the old coffee can treatment where you got a bunch of hardware oh my gosh i don't even know what a coffee can i never heard it called that before i don't even know what a three-quarter by three and a half is oh yeah yeah i know don you want to show us how a leg goes together yeah so this is the actual wheel kit like inside of this leg and we'll demonstrate it later but there's a screw jack okay kind of like a trailer jack might have on the tongue yeah for a screw jack and when you want to adjust the height of your dock if the water is up or down yep this is going to be flush with the top of the dock you just take an inch and an eighth socket and a drill you'll be able to adjust the whole dock up and down with each leg okay so so you know so once it's in you can actually then adjust it up and down right if your water elevations change yeah without getting in the water let's go in here so this is the connection system ready to loosen this how we connect the two dock sections together so the way the quick attach works you see these flanges coming off this aluminum extrusion yeah they made up with these two tracks there's also a track in the bottom of this okay so then this tightens it to