Skip to main content

Burnish for High Sheen and Smoothness

5:29
14:28
201.2K views

At 5:29 in

DIY Venetian Plaster Walls!

What happens here

Tools and materials

  • Clean Cloth
  • Flexible Venetian Plaster Trowel
  • Sander (optional)
  • Small Spreader/Putty Knife

What they say

Hide

and just gonna stick these things and the brush bag again and cover it up so they don't dry out and then we're gonna continue on doing my second coat so the second coat I can do the same technique I can just roll it on with microfiber roller or I can draw it on and to show you you traveling on so you can see what the travel bond look without missing a role or looks like the subtle dry really fast and you can start calling it out as soon as it's dry so not working by long on my second color I'm going to show you you can do the same technique you can just random roll it with a microfiber roller or you can try them using a trowel method this time is to show you what's going on once on this randomly trying it on working up tonight see you later the season four inch knife to load up my bolero a flex combination of my high this is your opportunity they'll spots that you have light spots to just leave a little bit more over the top of those light spots and don't put too much pressure so you can cover Bob so you can see I had some you know some light spots you'll hear where I was working on the lights and I can just leave a little extra over to cover those white spots working you know hydrates see getting I'm not using the microfiber roller to get up here this time so I'm just kidding this closest to that tape as I can second coach gonna dry it a little bit faster than the first coat because aren't they got some you know a quarter of a Nation posture on there let's do absorb the moisture you know out of the product you're a lot faster and so this really drive a little bit quicker might be other put my third coat on and possibly even about an hour there's every now that I'm seeing spots that just need to be filled and I'm just leaving just taking a little bit of pressure off a tool to leave a little bit of behind and fill those the third Tony it's just really you know different than the last coat you're just flattening it out more filling in Laura bit and it's gonna end up having more of that look the multi colors luck with a lot of depth as walls that be really flat and glassy smooth lines down if you do have any questions or comments about this technique ready the viral products just leave it in the comment section down below I'm answering your questions and comments and we do follow and check that so this leaving down low alright so I've got my three coats all done now I got them all a nice looking concrete effect now if you wanted to just end right here you…

Auto-generated from the video audio.