Skip to main content
Stesso

Install Floating Vanity

6:00
9:40
918.9K views

At 6:00 in

DIY Master Bathroom Makeover

Watch on YouTube

What happens here

With the floor prepared, it's time to install the floating vanity. This involves hanging the cabinet onto the wall studs. Position car jacks underneath the cabinet to support its weight temporarily. Use a small hydraulic bottle jack (Dayton 4-ton bottle jack shown in the video) to carefully lift and fine-tune the cabinet's height and level it into place. Once level, secure the cabinet directly to the wall studs through the sides of the cabinet using screws.

Goal: Mount and level the custom-built floating vanity

Tools and materials

  • Car Jacks — Temporary support for the cabinet's weight during installation
  • Cordless Drill — Driving screws to secure the cabinet to wall studs
  • Hydraulic Bottle Jack Dayton — Lifting and leveling the cabinet for precise installation
  • Level — Ensuring the cabinet is perfectly horizontal and vertical
  • Screws — Securing the cabinet to wall studs

What they say

Hide

get started today thanks audible let's get back to words speaking of luck I was lucky enough to have my wife come and help me hang this cabinet up and after the cabin was secured and hanging off the back wall sitting on car jacks I used a small hydraulic bottle jack to lift the cabinet and level it into place one so then I then secured it into the wall steps through the cabinet from the sides

Auto-generated from the video audio.