Skip to main content
Stesso

Construct Face Frames

1:23
9:40
918.9K views

At 1:23 in

DIY Master Bathroom Makeover

Watch on YouTube

What happens here

Rip wood strips for the cabinet's face frames. Assemble these strips using a dowel jig (or a Festool Domino for efficiency) to create precise mortise and tenon style joints. Apply wood glue to the joints before securing them with dowels. Once assembled, attach the face frames to the front of the cabinet base using wood glue and pocket holes, placing pocket holes in areas that will be concealed by doors or drawers.

Goal: Add decorative and structural face frames to the cabinet

Tools and materials

  • 3/8 inch Drill Bit — Drilling holes for dowels
  • Clamps — Holding pieces together while glue dries
  • Cordless Drill DeWalt — Drilling dowel holes and driving pocket hole screws
  • Dowel Jig Rockler — Creating precise holes for dowel joints
  • Table Saw Laguna — Ripping wood strips for face frames
  • Dowels — Reinforcing joints in the face frames
  • Pocket Hole Screws — Attaching face frames to the cabinet base
  • Wood Glue — Adhering wood pieces together
  • Wood Strips — Building the face frames

What they say

Hide

on the square and narrow throughout this section of the building to conceal the exposed plywood edges I built the cabinet face frames securing them with wood glue and pocket holes now in order to secure the face frame successfully to the cabinet base make sure you place enough pocket holes on the cabinet sides vertically specifically in areas where you can't see them even when the doors and drawers are open for the cabinet doors I wanted a retro pleated look so the pieces ripped to two inch strips and

Auto-generated from the video audio.