Surface Preparation and Setup

1:09

14:04

192K views

At 1:09 in

DIY Furniture Painting. Painting Household Furniture With Spray Paint Cans.

Watch on YouTube

What happens here

Place the stool on elevated wooden blocks (2x6s) to ensure the feet are off the ground and to allow for painting all surfaces. The presenter chose to work outdoors in the grass to minimize overspray issues. Inspect the entire furniture piece for rough spots, especially areas where stickers might have been, and lightly sand them using a sanding sponge. The goal is a smooth finish for optimal paint adhesion and appearance. After sanding, thoroughly wipe down the stool with a clean rag to remove all dust and debris.

Goal: Create a smooth, clean surface for painting and set up a proper workspace.

Tools and materials

Rag — Wiping down the stool to remove dust and debris
Sanding Sponge 3M Pro Grade — Removing rough spots and sticker residue from the stool
Wooden Blocks — Elevating the stool to allow painting of all surfaces, including the feet
Wooden Stool — The furniture piece being prepared

What they say

(2,500 characters)

Hide

brand new. So, here we go. We got my I got my stool sitting right here. And I've got it on just a couple pieces of wood. I' I'm out here in the grass cuz I don't want to get any of this oilbased overspray on anything. I'd rather it just fall into the grass cuz then if I mow my grass, it's gone. But I do want the feet off the grass. So I'm setting them on to 2 by sixes. And that way I can get the feet all painted and it won't be down in the grass or in the dirt. And I got my Rustoleum cans right here. And these are twoin-one spray cans. And they're primer and paint in one. But I definitely like to prime my surface first because it's just going to give a way better bite and then it's going to give a more durable finish. And I got this chair sitting here and it's uh it's going to be something that somebody's sitting on and stuff. So, I want it and their feet's going to be on, you know, these crossarss and stuff like that. So, I really want a good durable finish. And I want something that's going to bond really well. And a a straight primer is always going to bond way better than an all-in-one paint. That's a primer and paint in one. So, I'm going to be priming it first. And then I'll be uh top coating it with my two colors. And I'm going to be spraying the the top of it right here with a green color. And I'll be doing the legs with a yellow color. And I got the chair sitting here. And you always want to inspect your piece of furniture to make sure there's nothing rough on it. If there's anything rough on the furniture, you're just going to want to lightly sand it because you want to start off with a smooth finish. And this does, this piece of furniture, this little chair had a sticker on it at one point in time. And so I'm going to sand that paper sticker off. Get that off there. And it also sanding it even just makes your primer even bite a lot better, too. Your primer is designed to bite to a really smooth surface, but if you do lightly sand it here again, you're just going to get a more more durable and stronger finish. So, I'm going to sand this top really good. Get this paper off here. Sticker. It doesn't take much to get it off. So, that sticker is all gone. Now, I'm just going to inspect to make sure there's no rough spots on this chair. If I feel any rough spots, I'll just lightly sand them. Just inspect it really good. And then this chair is in pretty good condition. I just picked this up at a secondhand store for $5. I'm actually going to use it in…

Auto-generated from the video audio.