Skip to main content

Understand Crown Molding Basics and Spring Angle

0:03
1:41
125.7K views

At 0:03 in

Cutting crown molding flat

What happens here

Before making any cuts, it's essential to understand how crown molding is designed to sit. The presenter demonstrates that crown molding does not sit flat against the wall; instead, it rests at an angle between the ceiling and the wall. This angle is known as the 'spring angle'. The tutorial specifies a 38-degree spring angle for the crown molding used in this demonstration. Knowing your molding's specific spring angle is crucial for accurate cuts.

Goal: Understand how crown molding sits and identify its specific spring angle.

Tools and materials

  • Crown Molding — Demonstrating the spring angle and orientation
  • Pencil — Pointing to demonstrate angles

What they say

Hide

Does your crown molding end up looking like this? You want it to look like this? Let's get after it. Before we even touch the saw, you need to understand how crown sits. This is your ceiling and this is your wall. Crown doesn't sit flat on the wall. It sits at an angle. This is called your spring angle. Crown molding comes in different spring angles. Know what spring angle you have before you make the cut. For this video, we're doing a 38° spring angle. We're going to start with an inside corner. Put your left piece on the left side of

Auto-generated from the video audio.