Skip to main content

Cut Right Piece for Outside Corner

1:05
1:41
125.7K views

At 1:05 in

Cutting crown molding flat

What happens here

For the right piece of an outside corner, place the crown molding flat on the miter saw's bed, with the right end of the molding on the right side of the saw. Set the miter angle of the saw to 31.6 degrees to the right of center. Then, tilt the saw's blade (bevel) to the left at 33.9 degrees. Ensure the 'ceiling side' of the crown molding is firmly against the saw's fence. Make the cut.

Goal: Cut the right piece of crown molding for a precise outside corner joint.

Tools and materials

  • Crown Molding — The material being cut
  • Miter Saw RIDGID — Cutting the crown molding at precise angles

What they say

Hide

the same. Move your bevel right ceiling side towards your fence and cut. Right side, right side of the saw, miter to the right bevel to the left ceiling towards your fence and cut. Get it where you want it, nail it up. Little bit of [snorts] caulk and some paint will clean that right up. That's how you cut 38° crown molding flat.

Auto-generated from the video audio.