Skip to main content

Cut Left Piece for Inside Corner

0:21
1:41
125.7K views

At 0:21 in

Cutting crown molding flat

What happens here

To cut the left piece for an inside corner, place the crown molding flat on the miter saw's bed, with the left end of the molding on the left side of the saw. Set the miter angle of the saw to 31.6 degrees to the right of center. Then, tilt the saw's blade (bevel) to the left at 33.9 degrees. Ensure the 'ceiling side' of the crown molding is firmly against the saw's fence. Make the cut.

Goal: Cut the left piece of crown molding for a precise inside corner joint.

Tools and materials

  • Crown Molding — The material being cut
  • Miter Saw RIDGID — Cutting the crown molding at precise angles

What they say

Hide

the cut. For this video, we're doing a 38° spring angle. We're going to start with an inside corner. Put your left piece on the left side of your saw, right piece goes on the right side of your saw. For inside corners, the saw goes opposite. Take your miter put it at 31.6. Tilt your bevel left set to 33.9. Ceiling side towards your fence and cut. Take your right piece, put it on the right side of your saw, move your miter

Auto-generated from the video audio.