Skip to main content
Stesso

Access Electrical Panel and Identify Breaker

0:31
1:00
23.3K views

At 0:31 in

Customer had a Bad Water Heater, what would you do if you were at this job? #electrician

Watch on YouTube

What happens here

Upon arrival at the commercial office building, locate the main electrical panel. For commercial properties, these panels are often found outdoors. Use a screwdriver, if necessary, to carefully open the panel's cover. Once open, visually scan the circuit breakers and identify the one specifically labeled for the 'WATER HEATER'. This label is crucial for isolating the problem circuit.

Goal: Find and safely open the main electrical panel, then identify the correct circuit breaker for the water heater.

Tools and materials

  • Screwdriver — Removing screws to open the electrical panel cover

What they say

Hide

check to make sure I got my tool belt all my tools and material ready to go to the job today a customer called saying that their water heater wasn't working and that the circuit breaker keeps tripping so we on the way to about to check it out at a commercial office building so here is the building's electrical panel first thing I did was open the panel find the water heater breaker and try to flip it on I then put my clamp meter on to measure amperage and was drawing around 1.8 amps so then I went inside the building to the water heater and check the power so the water

Auto-generated from the video audio.