Install Walkway Pavers
0:17
0:36
644 views
At 0:17 in
curb appeal level 1000. #pavers #hardscape #landscaping #beforeandafter
What happens here
Carefully begin laying the "Unilock Bristol Valley" pavers on the freshly screeded bedding layer, following your predetermined pattern. Start from a fixed edge or a straight line to ensure consistency. Gently tap each paver into place with a rubber mallet to seat it firmly. As you progress, use a paver saw (a wet saw is recommended for clean cuts) or a paver splitter to cut pavers to fit curves, edges, and around any obstacles. Regularly check the alignment and levelness of the pavers as you work.
Goal: Install the main paver surface for the walkway.
Tools and materials
- Gloves — Protecting hands while handling pavers
- Knee Pads — Comfort during paver installation
- Paver Saw — Cutting pavers to fit edges and curves
- Rubber Mallet — Gently seating pavers into the bedding layer
- Safety Glasses — Protecting eyes during cutting
- Tape Measure — Measuring pavers for cuts
- Unilock Bristol Valley Pavers Unilock — The primary surfacing material for the walkway