Skip to main content
Stesso

Final Block Setback and String Line Alignment

10:29
25:06
3.1M views

At 10:29 in

Crazy Neighbor Calls the Building Inspector on us

Watch on YouTube

What happens here

After the pins are installed, ensure all blocks are fully engaged by kicking them forward until they are pushed as far back as they will go, creating a uniform setback across the course. Then, stretch a string line along the entire length of the course. This string line acts as a visual guide to ensure all blocks are perfectly aligned, resembling 'soldiers in a row', which is essential for both the structural integrity and the aesthetic appearance of the retaining wall.

Goal: Properly set back the blocks for consistent alignment and verify the course's straightness with a string line.

Tools and materials

  • Retaining Wall Blocks — The components being aligned and set back
  • String Line — Ensuring horizontal alignment of the block courses

What they say

Hide

below. All right. Now you got your pins in. Next step is, and this is an important one too cuz it makes it easier to straighten them. Make sure the blocks are out as far as they will go. So, like I said, it just makes makes my life easier when we're going and straighten them. So, let's talk about that move you just seen Sam do after he kicks the block forward. And the reason he's doing that is he's then evening out the set back on all of the blocks by sliding them all the way forward. But there's another step that still has to be placed. Just because the setback has now been evened out, we still have to run a string line on every single row to make sure that we get the blocks themselves to all line up perfectly in a

Auto-generated from the video audio.