Skip to main content
Stesso

Clean Blocks and Lay Reinforcement Grid

4:15
25:06
3.1M views

At 4:15 in

Crazy Neighbor Calls the Building Inspector on us

Watch on YouTube

What happens here

Before laying any blocks, meticulously clean the top surface of each retaining wall block and especially the channels where the pins will be inserted. Use a leaf blower to remove loose dirt and debris, and a scraper to clear any stubborn particles. Any obstruction can prevent proper seating of the pins and throw off the alignment of the entire wall. This step is crucial for the wall's long-term stability and aesthetic appeal. The reinforcement grid (geogrid) is laid directly on the compacted base before the first course of blocks.

Goal: Thoroughly clean blocks and channels, then lay the reinforcement grid for a precise and stable wall.

Tools and materials

  • Leaf Blower Milwaukee M18 Fuel — Removing loose dirt and debris from block surfaces and channels
  • Reinforcement Grid — Providing tensile strength to the soil mass, preventing wall movement
  • Retaining Wall Blocks — The main building components of the wall
  • Scraper — Removing stubborn dirt and debris from block channels

What they say

Hide

Next bit also important. You got to clean these suckers out. [Music] Okay. So, obviously, you know, you don't want nothing on the top of the blocks. You don't want anything in these channels where the pins go, too, cuz it can make it not pin all the way. Um, so yeah, once you got that cleaned off, you know, you want to check like right here, this is going to have to come off. It's a little bit of little bit of dirt, but that's enough to throw the course off. So, need to get my

Auto-generated from the video audio.