Install 2x6 Cross Members
15:10
23:13
572K views
At 15:10 in
Building Outdoor Pergola ALONE!
What happens here
Begin installing the 2x6 cross members. Use a miter saw to cut one end of each 2x6 at a 30-degree angle for a decorative touch. Lift and place these cross members across the main 2x10 beams, ensuring even spacing. Secure each cross member to the main beams using a cordless drill and screws. Repeat this process for all 22 cross members, staggering installation to maintain stability. The video shows the use of small black hardware pieces to further secure the cross members, providing both reinforcement and visual appeal. Note: The creator mentions he would have preferred 2x8 or 2x10 for this layer for a bulkier look, but proceeded with 2x6s.
Goal: Add the first layer of horizontal cross members
Tools and materials
- 2x6 Lumber — First layer of cross members for the pergola top
- Black Hardware Pieces — Securing cross members and adding aesthetic detail
- Cordless Drill Ryobi — Driving screws
- Miter Saw Ryobi — Cutting 2x6 cross members with a 30-degree miter
- Pencil — Marking spacing
- Step Ladder — Reaching high to install cross members
- Tape Measure — Measuring spacing
- Wood Screws — Securing cross members