Install Waterfall Spout and Pump
3:56
18:44
342.1K views
At 3:56 in
Building Backyard WATERFALL FEATURE
What happens here
Position the water pump at the bottom of the water basin. Connect the flexible hose from the pump to the waterfall spout. Drill a 1.25-inch hole through the top part of the water basin using a spade bit to feed the pump's hose and electrical cord through to the back. Securely glue the waterfall spout in place onto the back wall frame using Flex Glue and a caulk gun. Place a large rock on top of the spout while the glue dries to ensure a strong bond.
Goal: Integrate the water circulation system and waterfall spout
Tools and materials
- Caulk Gun — Dispensing Flex Glue
- Drill Ryobi — Operating the spade bit
- Flex Glue Flex Seal Family of Products — Gluing the waterfall spout in place
- Large Rock N/A — Weight to hold the spout while glue dries
- Plastic Garden Shears — Cutting the pump's corrugated hose to size
- Spade Bit — Drilling a hole for the pump hose/cord
- Waterfall Feature Kit — Contains pump, hose, spout, and filter
What they say
(902 characters)Hide
What they say
(902 characters)Auto-generated from the video audio.