Skip to main content
Stesso

Weld Suspension & Electrical Brackets

2:31
21:23
1M views

At 2:31 in

Building a Dump Trailer by hand-Start to Finish FULL time lapse

Watch on YouTube

What happens here

To facilitate easier access for welding, the main trailer frame members are temporarily flipped upside down on the work stands. Miguel and Marvin then work together to tack weld the heavy-duty brackets for the suspension system onto the frame, ensuring precise alignment. Once properly positioned, Miguel proceeds with full, strong welds to permanently secure these critical load-bearing components. Subsequently, smaller brackets designed to hold the trailer's electrical wiring are also tack welded and then fully welded along the frame.

Goal: Securely weld all brackets needed for suspension and electrical systems.

Tools and materials

  • Clamps — To hold components during tack welding
  • Protective clothing — Body protection from sparks and heat
  • Suspension brackets — Components for attaching leaf springs/axles
  • Welding gloves — Hand protection from heat and sparks
  • Welding helmet — Eye and face protection during welding
  • Welding machine Lincoln Electric — For joining steel components (tack and full welds)
  • Wiring brackets — Small components to secure electrical wiring

What they say

Hide

before they box the frame together they flip the individual frame members upside down and weld on the brackets that will hold the suspension in place then they'll rotate them back around box it out and get ready to hang the suspension [Music] flash warning coming up in three two one the brackets that will hold the trailer wiring in place are the next thing to be welded onto the frame [Music] miguel and marvin move into their next

Auto-generated from the video audio.