Skip to main content
Stesso

Project Introduction and Parts Overview

0:04
33:52
42.9K views

At 0:04 in

Budget Turbo Yukon XL 4L80 Conversion (Part 3): Sticking It In! Swap Tips + HD Transfer Case Hunt!

Watch on YouTube

What happens here

The video begins with an introduction to the project, which involves swapping from a 4L60E to a 4L80E transmission in a GMC vehicle. The presenter mentions that an HD2 shift kit was previously installed and the next steps are to reinstall the transmission pan, replace the flexplate and torque converter, and prepare for the transfer case installation. The presenter highlights the new ProTorque flexplate and Boninfante Friction components that will be used.

Goal: Understand the project scope and gather initial components

Tools and materials

  • 4L60E Transmission — The transmission being replaced
  • 4L80E Transmission — The core component being installed/prepared
  • GMC Vehicle GMC — The vehicle receiving the transmission upgrade
  • ProTorque Flexplate ProTorque — New flexplate for the transmission swap

What they say

Hide

excuse me all right guys welcome back this is episode three yep got the right amount of fingers where we are going to be bolting the 4l80 to the 5.3 going over the new flex plate converter all that stuff first things first i got to get the pan back on here the previous video if you have not seen it uh we installed the necessary components of an hd2 shift kit into here into the pump but uh just had to go get a new filter today so we gotta throw that back on then we're gonna pick uncle rob up and pull the old flex plate off and dive into the new components here from pro torque and bonnet font friction sfi certified flex plate triple disc converter all the good stuff um we'll go more detail on that when it's time to open them but right now we gotta put the filter on there and put the pan back on where did uh i put the filter right well this is it pretty simple cool

Auto-generated from the video audio.