Skip to main content
Stesso

Modify Separator Plate by Drilling Holes

7:35
42:27
41.7K views

At 7:35 in

Budget Turbo Yukon XL 4L80 Conversion (Part 2): Prep For Boosted Power! TransGo HD2 ShiftKit Install

Watch on YouTube

What happens here

The next modification involves the separator plate. First, mark the designated holes (A, B, and C) on the separator plate using a permanent marker, as indicated in the instructions. Then, use a cordless drill with the appropriate drill bits (specified in the kit) to enlarge these holes. The presenter emphasizes double-checking the holes before drilling, as mistakes cannot be undone.

Goal: Enlarge specific holes on the separator plate to increase fluid flow for firmer shifts.

Tools and materials

  • Cordless Drill DeWalt — Drilling holes in the separator plate
  • Drill Bits — Enlarging holes as per instructions
  • Permanent Marker Sharpie — Marking drill locations
  • Separator Plate — The metal plate to be drilled

What they say

Hide

through the dipstick hole which i used to have the dipstick i don't know if i've even brought it here i brought this here when i brought uncle rob down here actually drove back from pennsylvania when i went to get uncle rob from my uncle i drove back with this in the back so that's how it got here kind of funny you transported its own transmission down here i don't know why i can't talk today but anyway got this kind of rigged up here to drain

Auto-generated from the video audio.