Skip to main content
Stesso

Mock Up Turbocharger Position

1:38
23:47
32K views

At 1:38 in

Budget Turbo Yukon: Cold Side Fabrication and Hot Side Welding (Pipe Cutting & Layout Tips)

Watch on YouTube

What happens here

The turbocharger is placed onto the manifold to determine its ideal clocking and position within the engine bay. This initial placement helps in visualizing the routing of the charge pipes.

Goal: Determine the optimal placement and orientation of the turbocharger

Tools and materials

  • Engine Manifold — Mounting point for the turbocharger
  • Turbocharger — Placing onto the manifold to determine clocking and position

What they say

Hide

oh we got the manifold on set the turbo on there i'm just kind of mocking up where the clocking of this is going to be so everything is like loose right now we can all turn it i'm just getting this out of the way too but i'm going to set where the center section is because the turbine housing is where the turbine housing is going to be it's just how it is so i'll make sure this is pointed straight up and down and then take the 13 and just snug up a couple of these just so it doesn't turn on me again not really a big deal it's definitely not going to go anywhere now but now i'll be able to clock the compressor housing independently of everything else so this just won't be doing stupid stuff so let me get this out of the way now it's annoying me less is pushed out of

Auto-generated from the video audio.