Skip to main content

Fabricate and Fit Driver's Side Charge Pipe

12:42
23:47
32K views

At 12:42 in

Budget Turbo Yukon: Cold Side Fabrication and Hot Side Welding (Pipe Cutting & Layout Tips)

What happens here

The presenter selects a section of aluminum pipe, marks it for a precise cut, and uses a chop saw to cut it to the required length and angle. He then test fits this newly cut piece as part of the driver's side charge pipe assembly.

Goal: Custom cut and fit the driver's side charge pipe

Tools and materials

  • Aluminum Pipe — Material for custom charge pipe
  • Chop Saw — Cutting the aluminum pipe
  • Marker Sharpie — Marking cut lines on the pipe
  • Safety Glasses — Protecting eyes during cutting

What they say

Hide

out maybe i won't maybe i won't maybe oh oh good maybe she will a little lane reference good song by the way definitely one of my all-time jams but now let's get this uh get this saw here and get to chop it if you're wondering why i opened this door did i open the door to fling the chips outside so i wouldn't have to clean them up that is definitely not the reason i did that even though it's really cold outside just chopped another one here we're gonna see how this goes if you've watched any of my tube fab videos before i'll say it if you haven't i'll say it again there's really no rhyme or reason to this specificity of where you cut stuff it's just you got to use your eye and you eventually acquire a feel for it but when you don't know what you're doing just cut what you think is right just make the cut the less you think about the better just trust your gut and start holding it up to other stuff that's how you make things i could have gone farther on this and maybe even taking a straight shot maybe i could do that adjust this clamp if i can adjust that clamp and i see that it can be a

Auto-generated from the video audio.