Skip to main content
Stesso

Install Baseboards and Toilet

16:24
18:40
211.8K views

At 16:24 in

Bathroom Remodel Pt.3 Laying Floor Tile

Watch on YouTube

What happens here

Measure the baseboards and cut them to length using a miter saw. Attach the baseboards to the wall using a nail gun, ensuring they sit flush against the tiled floor. Seal any gaps with caulk. For the toilet installation, connect the toilet flange. Place a new wax ring onto the toilet's base, then carefully lower the toilet onto the flange, ensuring it is level and stable. Connect the water supply line to the toilet and turn on the water, checking for leaks. Secure the toilet to the floor using bolts and caps.

Goal: Measure, cut, and install baseboards, then set the toilet and connect its water supply.

Tools and materials

  • Adjustable Wrench
  • Baseboards
  • Caulk Gun and Caulk
  • Miter Saw (DeWalt)
  • Nail Gun (Milwaukee FUEL)
  • Tape Measure
  • Toilet
  • Wax Ring

What they say

Hide

you're welcome [Music] i've learned this trick a long time ago but in case you are a newer builder and you're not didn't know this trick i want to show you i said 16 on center every time you see a red on your tape measuring uh that is usually these major numbers are the 16 on center that already separate on tech tape measure for people for framing so here's a prime example what i usually do i find one stud and then i measure from there so here's a prime example because this stud's already exposed so if that is our one of our 16 on center check this out the next one is 32 and yep lines up there and if we follow it some more the next one is 48 right there so hope that trick helps you [Music] guys [Music] [Applause] [Music]

Auto-generated from the video audio.