Grout the Tiles

What happens here

Mix sanded grout (color: Charcoal) with water to a toothpaste-like consistency. Use a grout float to spread the grout diagonally across the tile surface, pressing it firmly into all the joints. Work in small sections. After applying, wait a few minutes for the grout to set slightly, then use a damp sponge to wipe off excess grout, making sure not to pull grout from the joints. Rinse the sponge frequently in a fresh bucket of water. Finally, use a clean, dry cloth to buff the tiles clean, removing any remaining haze. Allow the grout to cure completely as per manufacturer instructions.

Goal: Mix sanded grout, apply it to the tile joints, and then clean the excess.