Mix Epoxy Components

1:49

15:16

279.6K views

At 1:49 in

Applying Epoxy The First Coat. Epoxy Floor Application Instructions. Instructions applying epoxy.

Watch on YouTube

What happens here

Combine the two parts of the industrial epoxy in the 5-gallon bucket. Part B is typically the hardener and appears clear, while Part A is the color. Pour Part B into the bucket first, followed by Part A. Use a throwaway brush to scrape out all contents from the original cans to avoid waste. This initial mixing is crucial to activate the epoxy.

Goal: Combine Part A and Part B of the epoxy.

Tools and materials

5-Gallon Bucket — Container for mixing the epoxy
Rubber Gloves — Hand protection
Throwaway Brush — Scraping epoxy from cans
Two-Part Industrial Epoxy — The coating components being mixed

What they say

(855 characters)

Hide

activate. And you want to take and read the instructions on your your epoxy, your two-part epoxy, and make sure you allow it to sweat the proper amount of time so you get the the hardness out of the epoxy coat before it uh or after it dries. So, now I'm going to show you this part of mixing these two together and then we're going to go apply it on our floor. So, we got part B right here. And this is the clear one. Just dumping this in here. If you want to see my previous videos, part one and part two of my video series at the end of this video, I'll have them posted where you can just click on the video and go back and watch part uh one and two. And I got my throwaway brush right here. This is just to scrape out everything out of these gallons to get everything out of them cuz this stuff is really expensive and I don't want any to go to waste.

Auto-generated from the video audio.