Cleanup and Ventilation

13:53

15:16

279.6K views

At 13:53 in

Applying Epoxy The First Coat. Epoxy Floor Application Instructions. Instructions applying epoxy.

Watch on YouTube

What happens here

Once the entire first coat of epoxy is applied, carefully pull up the painter's tape along the garage door line. Gather all used tools (rollers, brushes, buckets) and place them in a 5-gallon bucket to dry out before disposal. Keep the garage door raised to ensure proper ventilation for the drying epoxy. This helps dissipate fumes and aids in the curing process. Wait for the recommended drying time before proceeding to the next steps.

Goal: Properly clean up tools, remove tape, and ensure adequate ventilation for the curing epoxy.

Tools and materials

5-Gallon Bucket — Collecting used tools for disposal
Painter's Tape — Removed from the garage door line
Used Rollers and Brushes — Disposal after use

What they say

(1,045 characters)

Hide

So there you have it. We got it all complete now. All rolled out. We're just going to pull our tape, put all the rest of the epoxy in that 5gallon bucket. All the tools are just trash. put them in the bucket, let them dry out, and then we'll throw them away. We're going to lower this garage door down. At the end of the day, you want to keep it up so all these fumes will just be well ventilated. And there you have it. That's the first coat of epoxy. Now, stay tuned for the next part. And this will be part four, applying the second coat of epoxy. And then on this garage, we're actually going to be applying some flex. And so, some color flex that add a lot of color to it. They got three different colors. And we'll be spreading out these color flex and then adding a clear coat to that. That will be the fifth the fifth part of my epoxy series. So now you can check out if you haven't seen part one and two. I'll have them right up here on both sides of my video where you can click on watch part one and part two. Well, that's it for part

Auto-generated from the video audio.