Skip to main content
Stesso

Two-Coat Strategy: First Coat Application

11:28
28:23
80.1K views

At 11:28 in

An Ultimate Guide To Cut Ins: Paint Straight Lines Like a Pro!

Watch on YouTube

What happens here

For the first coat of paint, apply it a little distance away from all trim (windows, baseboards, door frames) and ceiling cut-ins. This strategy ensures that the first coat doesn't get thick in those sensitive areas and allows for a clean, precise second coat. We typically apply two coats of paint to walls. The second coat is where you will do all your final, precise cut-ins, bringing the paint exactly to the edge of the ceiling, baseboards, or trim. This two-coat process helps eliminate potential 'halos' or visible differences in paint thickness or color, especially around edges. If using a high-end paint, like Behr Dynasty, the excellent coverage might allow for less concern about 'haloing' or touching up between coats.

Goal: Apply the first coat of paint while keeping it away from edges and perfecting cut-ins on the second coat.

Tools and materials

  • Paint Behr Dynasty — First coat application

What they say

Hide

inch once again the these are from the camera from that angle right there it may appear to you like it's a perfectly you know 90° Corner that smooth and flat it's not there's a lot of texture differences there's chunks and stuff there's bumps there's a bunch of things to navigate through to get your line to look straight now here's another thing with cut ends that I like 4-in roller that has the roller rolled over the end now my corner cut in right here and I can do my my corner cutting while I'm on the ladder finish that up and my corner cutting is done that fast just like that going to come back as far as I can reach you can see right here I've got quite a bit bumps and stuff to deal and navigate I'm letting my brush navigate its way over those bumps come back just like that now I've gone as far as I can on the ladder and now I'm going to move over now this right here one code so I'm going to our first first coat we keep it away from all of our cut ends our window trim baseboards and ceilings a little bit away cuz this is our first coat we always two coat our walls that's pretty common from a professional painter standpoint second coat we're going to do our all our cut in ceiling cuttings trim cutins baseboard cuttings come back and do our second coat roll up as high as we

Auto-generated from the video audio.