Skip to main content
Stesso

Managing Drying Time and Paint Type

12:49
28:23
80.1K views

At 12:49 in

An Ultimate Guide To Cut Ins: Paint Straight Lines Like a Pro!

Watch on YouTube

What happens here

When working in hot and dry conditions where paint dries quickly, it might not be practical to back-roll immediately after brushing, as the paint might already be starting to dry. If the paint dries before you can back-roll it while it's still wet, you risk pulling the paint and creating an undesirable texture. In such cases, if you're using a lighter color paint that touches up well (and not a dark accent color), it's acceptable to let the cut-in dry completely and then perform touch-ups later. However, if using a dark accent color, it's crucial to work quickly and, ideally, have a second person immediately back-roll behind you while the paint is still 100% wet. This 'working as a team' approach is essential for dark colors in fast-drying conditions to prevent haloeing. When dealing with textured walls, remember that the goal is to match the existing texture, not necessarily to create a perfectly smooth brush line, as the texture itself is forgiving. If you were painting smooth walls (a level 5 finish), your approach would be different.

Goal: Adapt painting techniques based on drying conditions and paint color to avoid issues like 'haloing' or poor texture.

What they say

Hide

do our second coat roll up as high as we can so we're going to eliminate this possible large Halo right here and this the texture is running this way from the nap the roller is going to come up as high as we can without touching the ceiling and it's going to eliminate it that direction and make it all consistent from ceiling to wall do I let my cut ends dry before I come back and um roll this wall if you're working just one person you know a lot of times that's not practical this paint up here it's actually really hot in this room right now and this is going to dry extremely fast I can do one wall at a time by the time I can come back and roll over this what happens is if this begins to dry Begins the drying process over and you come up and roll over it and come back down it's actually going to pull the paint and it's going to cause it to stipple really bad so if it's really hot and you can't come over this and roll over it which is ideal when this is actually wet it needs to be still 100% wet before you roll over it or it's going to cause really really bad problems now if this is a really dark color really need to do that you really need to work one roll at one wall at a time and it's ideal to have somebody working right behind you and rolling over this and working as a team uh as a light color and this is a really high-end paint that I'm using and I have experienced using it even with a dark color it doesn't Halo it touches up absolutely amazing so I'm comfortable letting this dry and not rolling over it while it's wet I've used Paints in the past were even a lower end gray lower end paints a darker color like a dark chocolate Brown even rolling over this while it was wet I still could see the Halo really bad so if you're on really concerned if you got like dark accent colors I highly recommend you use a really high-end paint one of the paints that I use is uh bear U bear Dynasty I've had experience with it with dark colors accent colors no haloing touches up absolutely amazing so now I'm coming back here still wet I'm going to can change this overlap come up put my paint up I work it up into the corner if it starts to run out really fast G to just come back the opposite direction as soon as the the brush runs out of paint I'll come back the opposite direction come back so just to go back over just the reason why I like an angled sash brush is I draw my cut in with that point of the brush and you can't like drag it out as far as the flat sash brush but…

Auto-generated from the video audio.