Back-rolling for Uniform Texture

9:29

28:23

80.1K views

At 9:29 in

An Ultimate Guide To Cut Ins: Paint Straight Lines Like a Pro!

Watch on YouTube

What happens here

After applying the cut-in with a brush, use a roller to 'back roll' the painted area near the ceiling. This step is crucial because brush strokes and roller stippling create different textures, which can lead to noticeable color and sheen differences. Back-rolling with a roller helps to blend the brush-painted area with the rest of the wall's rolled texture, creating a uniform finish. Bring the roller as close to the ceiling as possible without touching it. This technique eliminates visible brush strokes and roller marks running in different directions, especially important when using dark colors or lower-grade paints where a 'halo' (a noticeable border of differing texture/color) might otherwise appear. For corners, a 4-inch roller with rolled-over ends can be used to easily fit into the corner and achieve a consistent texture.

Goal: Achieve a consistent texture and color across the entire wall, blending brush strokes with rolled paint.

Tools and materials

4-inch Roller — Back-rolling the cut-in areas for uniform texture
Roller Pole — Extending reach for back-rolling high areas

What they say

(1,623 characters)

Hide

previous paint job and then I'm going to come back and then back roll it now you know a lot of people just use a brush and they're just going to brush this and leave it and I want to talk a little bit about that and why I back roll so I've just left brush Strokes on here and it lays out the paint one way I'm going to come back and roll the Wall come up here I'm going to get about you know this far from the ceiling there's going to be brush Strokes left that direction um roller marks left this direction there's a different texture between the brush stroke and the roller which stipples it brush stroke stippling you're going to see a a color difference in the paint if you're using a really dark color or if you're using low gray paints higher end paints and what we call that line that you see it'll be a Halo so we don't want to um Halo it so I'm going to stipple it using a roller I'm going to stipple as close as I can to that ceiling now that texture left by the roller will match the texture on the wall wall and the color difference won't be any different I can't get all the way up there but at least I got about that close it eliminated most of the breast rows so that's why I actually back roll it with a roller because you literally will have a color difference a Sheen difference and a texture difference if you don't do that I'm going to come back now I did my line in that direction I'm going to come up put my tip of my brush up against the ceiling run it out come back feel in anything didn't fill in with the brush load up my brush I come One Direction come back the other direction f it in load up my

Auto-generated from the video audio.