Understand Tool Features and Project Goals

there's a hydraulic cylinder right here that runs this clip and basically if you can get the tree in that clip it will cut the tree it will cut hard wood soft woods brush weeds anything and everything and the project we have at hand oh and it also rotates so it rotates this way and that way in case you got a limb because every tree is not pointing straight up some of them are leaning like most of these were going to be taken out today so what we got to do is use the mini clip to get all that mess this is brush and debris clip it off down at the ground eventually and get all this debris out of the way so that they can park equipment underneath here without all the stuff falling out of the trees leaves and all that stuff so we got a little project today gonna be fun gonna be running the new holland tractor and the mini clip so before we get started let's introduce you to dad's tractor this is a t475 this is a 75 horsepower new holland tractor do you need 75 horse to run this no you need probably anywhere from 35 to 55 horsepower something like that and this tractor is perfect it's strong enough it's got a good heavy lift capacity i'll post some of the specs scrolling across the screen on what size tractor but this is the mini clip they make a bigger clip than this critter right here and again this thing rotates side to side when you run it on a tractor like this you really have a very very high reach it also telescopes out so we've got it in the furthest telescope out position you just pull a pin right here and it telescopes out i i'm gonna say it's about six feet from the bulkhead right there and this connects with skid steer quick attach and skid steer quick attach flat face connectors so that's how all that connects up it's ready to rock and roll ready to work right now we gonna get busy