Clean Drywall Edges and Remove Loose Paper

0:13

1:31

875.6K views

At 0:13 in

4 things to do before taping drywall

Watch on YouTube

What happens here

After seating the screws, carefully remove any loose paper or rough edges from the drywall surface. This is particularly important around screw holes, cuts, and seams. Use a sharp utility knife or joint knife to lightly scrape and trim away any frayed paper or plaster debris to create a clean, smooth surface for joint compound application.

Goal: Remove loose material and create smooth edges

Tools and materials

6-inch Joint Knife — Scraping larger areas of loose debris
Utility Knife — Trimming loose paper and chamfering butt joints

What they say

(480 characters)

Hide

Do these four things before you tape drywall. Let's get after it. First thing, make sure that every screw is slightly below your drywall. If you find one that's raised, just go ahead and drive it in a little deeper. Next, remove any loose paper or rough edges. Next, you want to find your butt joints. When two butt ends of the drywall meet, it's a butt joint. You want to go ahead and you want to 45 those. Get them all nice and flat. So, just take your knife, get a sharp blade,

Auto-generated from the video audio.