Level Base with Road Mix (Intermediate)

[Music] so this is what I mean by staggering them and really there's only one cut you need to know these are stock 10f Footers did not cut them the only thing I cut was the ends and I cut them to 27 and a half it's whatever you want them to be and so then you stagger them you know accordingly one thing before we get started is I got to make sure everything's left because the last thing I want to do is build this thing out of slant I'm going to really regret that so got a little p base or Road mix we're going to make sure we put in the spots that we need it it'll also help with drainage and make sure that water doesn't like get absorbed into this bottom Lumber even though it's really beefy it it's going to last for a very long time and then we'll get ready to secure it [Applause] [Music] so what I'm doing here is just putting the rest of the road mix under any gaps that I see theoretically you could have just poured a bunch of Road mix down and level it but uh I don't know it's it's up to you what you want to do it's not my project this is my project but the idea there is really to support everything that it doesn't bow over time