Assemble Wood Frame Using Pocket Holes (Advanced)

in good [Music] shape we got a Corner set up we're going to take our 8T boards and we're going to line them up put pocket holes on each end of them and connect all of them together this will create our side now the sheet galvanized steel that we're using is 27 in tall and uh 8 ft long so we'll just have to trim our board by about where's my 8ft mark oh there it is uh we're going to have to trim our board by about I don't know 3 in or so and uh we'll be able to connect them all together first one's down let's get another one going faster and there we have a second one now before our fronts and backs are done we need to put a reinforcement piece down here same idea just pocket hole it from here to there and that will allow for the galvanized steel cuz so thin to not bow out as you put soil or whatever in there now all we got to do is get our side pieces now because I bought three sheets we could really make our this thing as wide as we really want to uh 4T seems a little too wide and awkwardly looking but 3 ft which is about I don't know yay I think will look just perfect