Discuss Attachment Features and Controls

all right we're here cmp attachments we got the asb but we got a new tool there's the man derek how you doing buddy good good good hey thanks for having us out again derrick josh hi josh derek so derek i was telling these guys that i've been trying for two years to get my hands on this and you're actually not a big fan of it and you invented it yeah i'm not um i actually did a this one i did a nice big food plot so i spent a lot of time in it myself and i know what it means it needs to it needs some uh work on it in my opinion you know like a chainsaw there's a bar in front of the chainsaw for the cutter and that kind of meters the cut right so like if you took that bar off the chain would just lock up and that's the thing with this that needs something to meter the cut if you don't it you can do it with the machine it's just too much work too much work for it so it'll slow it down it's too much work for the driver you're constantly adjusting yeah slowing down and speeding up where if you have a meter cut you can just drive into it and not worry about it so it won't stall out the drop well let's make sure we're running make sure that we got everything right on the asp yep all right i'll go get that unloaded right now so what you're gonna end up doing is figuring out which button is powering up holding this and then when you run this it will run the grapple okay when you release it and you run this that will run the drum oh so it's gonna get a little different a little learning curve yeah like it's different than how we would normally set it up but this is the one this is the one that i use for my okay bobcat all right thanks andrew yeah he's got it dialed in so now you don't run these time you don't run the grapple and the