Skip to main content
Stesso

Verify Kill Switch Operation

6:13
10:56
7.2K views

At 6:13 in

100% THEFT PROOF! (almost)

Watch on YouTube

What happens here

Once the kill switch is installed, test its functionality. With the red key/handle removed from the switch, attempt to start the vehicle or activate interior electronics. There should be no power. Reinsert the red key/handle into the switch, which will restore electrical power to the vehicle. Then, demonstrate starting the vehicle to confirm successful re-engagement of the battery. This kill switch provides a strong anti-theft measure by making it impossible to start the vehicle without knowing about or accessing the hidden switch. It also prevents battery drain if the vehicle is stored for extended periods.

Goal: Confirm the kill switch effectively disables and enables vehicle power and understand its advantages.

Tools and materials

  • Vehicle — The object of the DIY project, Vehicle Key Unknown used for Starting the vehicle for testing

What they say

Hide

and now your your jeep's fine now check this out it's off I have nothing no matter what I do I got no juice nothing and I come out here I flip my kill switch and now my vehicle comes right to life and my batter's always 100% fresh I love this kill switch and it's pretty simple and straightforward to wire if you look right here we've got it on the positive we just have it zip tied around but the negative connection is right here to the to it so everything gets controlled straight through this switch we tuck that down and out of s out of mind and now if you go ahead and try to steal my Jeep you're so unless you know about it now of course if you guys know about it you'll probably just go in and do it but if you do steal it I don't care it's insured so there you go oh man look at

Auto-generated from the video audio.