Skip to main content
Stesso
Project

Turn water supply back on

Beginner4 hours

Part of project

Kitchen Faucet Replacement · Step 11 of 13

Helpful?

In this video

Slowly turn both shutoff valves counter-clockwise to turn the water back on. Use a flashlight to inspect all four connection points (two at the faucet, two at the valves) for any drips or leaks. Then, turn on the faucet and test both hot and cold handles to ensure correct connection and proper water flow. Let the water run for a minute to flush out any debris.

StatUpBox

193K subscribers

View Channel
Transcript
Hide

going to be your cold what we're going to do now is we're going to open up just the cold supply we're going to leave the hot in the off position so here we have hot to the left cold to the right I turn it on hot side I have to angry stop off so no water should come out now what I'm going to do is I'm gonna turn it to the right this is how you would test to make sure that your supply line is connected to the proper side in regards to the hot or cold now we're going to turn on our hot side if this video was a help if it was informational please subscribe

Auto-generated transcript. May contain errors.