Connect new water supply lines

Beginner4 hours

Part of project

Kitchen Faucet Replacement · Step 10 of 13

Helpful?

In this video

Connect the new braided supply lines. First, attach the lines to the corresponding hot and cold inlets on the new faucet, hand-tightening and then giving a final snug with the basin wrench. Then, connect the other end of the lines to the hot and cold shut-off valves, using a wrench to tighten the nuts while holding the valve body with another wrench.

StatUpBox

193K subscribers

Transcript

Hide

so guys for the supply lines i would suggest you just tighten it until you can't anymore all right guys so those are tight what we'll do now is we'll tighten the bottom of the supply line to the stop and guys once again with this you're going to tighten it down until it stops

Auto-generated transcript. May contain errors.

Connect new water supply lines

Advanced

4 hours

Part of project

Kitchen Faucet Replacement · Step 10 of 13

Was this clip helpful?

In this video

Connect the new braided supply lines. First, attach the lines to the corresponding hot and cold inlets on the new faucet, hand-tightening and then giving a final snug with the basin wrench. Then, connect the other end of the lines to the hot and cold shut-off valves, using a wrench to tighten the nuts while holding the valve body with another wrench.

Based on content fromStatUpBox· 193K subscribers

Video Transcript

(276 characters)

Hide

so guys for the supply lines i would suggest you just tighten it until you can't anymore all right guys so those are tight what we'll do now is we'll tighten the bottom of the supply line to the stop and guys once again with this you're going to tighten it down until it stops

Transcript may be auto-generated and contain errors.