Remove Old Seat and Clean Area — Remove Existing Toilet Seat

Beginner

Part of project

How to Install a Bidet Toilet Seat · Step 2 of 8

Helpful?

In this video

After successfully cutting through both bolts, the old toilet seat is now free. Carefully lift the entire old seat and hinge assembly off the toilet and set it aside for disposal. Inspect the area around the bolt holes on the toilet bowl. Remove any remaining fragments of the old bolts, nuts, or rust. Use a cleaning cloth and an all-purpose cleaner or disinfectant to thoroughly clean the porcelain surface where the new hardware will be installed. This ensures a clean base for the new seat.

Goal: Prepare Toilet for New Seat

Used in this video

Gloves (brand: Unknown, Gloves Material: Latex) — To handle the old, dirty toilet seat and cleaning chemicals.

112.7K views6213 minutes

Korky Toilet Repair

10K subscribers

View Channel

FAQs

How long does a typical electric bidet seat installation take, and is it suitable for someone with no plumbing experience?

This project is generally beginner-friendly and takes about 30-60 minutes. The most crucial steps involve shutting off the water supply, connecting hoses, and tightening connections properly, which don't require advanced plumbing skills.

What specific tools are absolutely essential for installing this bidet seat, beyond what might come in the box?

You'll primarily need an adjustable wrench to tighten water connections securely, a screwdriver (multi-head or flat/Phillips) for mounting the seat hardware, and possibly pliers for stubborn nuts. Most basic household toolkits will have these, and some bidet kits even include a small wrench.

What are the most important safety steps to prevent water damage or electrical hazards during the installation?

Always shut off your toilet's water supply valve completely before starting, and unplug any existing bidet if applicable. After connecting water lines, turn the supply on slowly and meticulously check all connections for leaks before plugging in the new electric bidet seat to avoid electrical issues.

How do I ensure this electric bidet seat will fit my toilet, and what if my toilet bowl shape is unusual?

Measure your toilet bowl from the front edge to the center of the bolt holes to confirm if it's 'round' or 'elongated,' as bidet seats are specifically designed for one or the other. The provided SmartBidet model is for round toilets, so verify your toilet matches this specification for proper fit and function.

Transcript

Hide

The bottom side and once you do do that you actually free up this bolt from the toilet Now if you use a grinder it's easy because you can remove the plastic part that's underneath the toilet that holds it And for now you wouldn't have to cut the bolt directly, but you Get under a thread. So now that we're done with the hard part here comes the easy thing installing a new toilet seat This is a toilet seat that I actually got from Amazon It came in less than 24 hours and it was less than $10. I was surprised by that Also the good part about it is that comes with instructions on the side and even the bolts that's on it is plastic So you'll never have a problem with rusting. So I definitely recommend you buying this product right here So now after that you want to install the new one and we good thing about these are it's up this plastic zone rust over

Auto-generated transcript. May contain errors.