stesso

Project

Unbox your new pedestal sump pump. Find the threaded discharge port on the pump body. Wrap the threads of the new PVC male adapter with three to four layers of Teflon tape, wrapping in a clockwise direction (the same direction you will tighten it). Screw the adapter into the pump's discharge port by hand, then give it a final quarter- to half-turn with channel-lock pliers to snug it up. Be careful not to overtighten, as this can crack the pump's plastic housing.

You're viewing a step from: How to Replace a Pedestal Sump Pump

Beginner

30 minutes

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for safely removing an old pedestal sump pump and installing a new one. The process involves disconnecting power, cutting out the old pump, cleaning the sump pit, preparing and installing the new pump with new PVC piping and a check valve, and thoroughly testing the final installation.

Based on content fromApple Drains· 181K subscribers

Frequently Asked Questions

What are the most critical safety steps I need to take before starting to replace my pedestal sump pump?

Always disconnect power to the sump pump circuit at your home's breaker panel first to prevent electrical shock. Wear work gloves to protect your hands from potential sharp edges or debris in the sump pit, and use a tarp to contain spills around the work area. Ensure the work area is well-lit and you have clear access to the sump pit.

Do I need to buy all the specific tools and materials listed, like the K2 1/2 HP pump and a dedicated PVC pipe cutter?

While the listed items are recommended for quality and ease, equivalent tools and materials can often be substituted. A dedicated PVC pipe cutter like the Hayes PC2-64 makes clean, straight cuts essential for a leak-free seal, which is critical. Upgrading from a 1/3 HP to a 1/2 HP pump can provide increased pumping power for better flood protection.

How important is cleaning the sump pit, and what's the best way to ensure it's ready for the new pump?

Thoroughly cleaning the sump pit is crucial because accumulated silt, gravel, and debris can clog your new pump's intake and shorten its lifespan. After removing the old pump, use a shop vacuum to remove all remaining water and solids from the bottom of the pit. Ensure the pit is as clean as possible before installing the new pump.

What are the most common installation mistakes beginners make with pedestal sump pumps, especially regarding the piping and check valve?

A common mistake is improperly installing the check valve, which should be placed above the pump to prevent water from flowing back into the pit. Another error is not using Teflon tape on threaded connections or failing to make clean, straight cuts on PVC pipe, leading to leaks. Ensure all connections are secure but not overtightened.