Skip to main content
Stesso
Project

Install High Drain Loop — Detach Dishwasher from Countertop

Beginner

Part of project

How to Remove an Old Dishwasher · Step 5 of 6

Helpful?

In this video

To install a high drain loop, obtain a drain hose bracket and a screw. Place the dishwasher's drain hose into the bracket. Position the bracket against the underside of the countertop, ensuring the top of the hose loop is at least 32 inches from the floor. Use a screwdriver to fasten the bracket to the countertop with the screw. Be careful not to screw through the hose itself.

Goal: Install High Drain Loop

  • Be careful not to puncture the drain hose with the screw.

Used in this video

  • Screwdriver (Screwdriver Type: Phillips Head Screwdriver, Power Source: Manual) — To fasten the drain hose bracket to the cabinet or countertop.
543.3K views45510 minutes
Chris Notap

1.1M subscribers

View Channel

FAQs

What are the absolute most critical safety steps I need to take before starting this project?

Before anything else, locate and shut off the electrical breaker dedicated to your dishwasher, and turn off the hot water supply valve, usually found under the sink. Verify both are off before touching any wires or hoses to prevent electric shock or water damage.

What specific tools from the list are absolutely essential for a beginner, and are there common alternatives?

You definitely need a Phillips head screwdriver, an adjustable wrench, and a bucket for drips. While specialized tools can help, these three will handle most disconnections. Ensure your screwdriver fits snugly and your wrench isn't stripped.

How difficult is this project for someone with no prior plumbing experience, and how long should it realistically take?

This is considered a beginner-friendly project, primarily involving disconnection. For a first-timer, plan for 1.5 to 2.5 hours, allowing extra time for identifying connections, stubborn fasteners, and safely managing any water spills.

I'm concerned about water leaking everywhere when I disconnect the hoses. How much water should I expect, and how do I minimize the mess?

Expect some residual water (1-2 cups) from the supply line and the dishwasher's sump. Place towels and a bucket directly under the connections before loosening them. Work quickly and have extra absorbent towels, like the WYPALL L40, ready.

Transcript
Hide

For this task, GE recommends the service of a professional plumber. To install a high drain loop, use a bracket large enough to fit around the drain hose, which is available at any local hardware store. Place the drain hose in the bracket. Screw the bracket to the underside of the counter. Be careful not to puncture or damage the drain hose. For marble, granite, or other hard surface countertops, the hose should be fastened on the side of the inside of the cabinet, 32 inches above the floor level.

Auto-generated transcript. May contain errors.