Skip to main content
Stesso
Project

Remove Washer Cabinet — Slide Dishwasher Out

Beginner

Part of project

How to Remove an Old Dishwasher · Step 6 of 6

Helpful?

In this video

With the clips removed and wiring disconnected, you can now remove the main cabinet. Tilt the cabinet slightly forward, then lift it straight up to clear the water inlet valve at the back. To get a better grip, you can open the washer lid and hold onto the edge of the tub opening. Carefully lift the entire cabinet shell up and away from the washer's base frame and set it aside in a location where it won't be damaged.

Goal: Expose the pump and drain hose

  • The cabinet can be bulky. Ask for assistance if needed to lift it safely.
170.0K views5865 minutes
Chris Notap

1.1M subscribers

View Channel

FAQs

What are the absolute most critical safety steps I need to take before starting this project?

Before anything else, locate and shut off the electrical breaker dedicated to your dishwasher, and turn off the hot water supply valve, usually found under the sink. Verify both are off before touching any wires or hoses to prevent electric shock or water damage.

What specific tools from the list are absolutely essential for a beginner, and are there common alternatives?

You definitely need a Phillips head screwdriver, an adjustable wrench, and a bucket for drips. While specialized tools can help, these three will handle most disconnections. Ensure your screwdriver fits snugly and your wrench isn't stripped.

How difficult is this project for someone with no prior plumbing experience, and how long should it realistically take?

This is considered a beginner-friendly project, primarily involving disconnection. For a first-timer, plan for 1.5 to 2.5 hours, allowing extra time for identifying connections, stubborn fasteners, and safely managing any water spills.

I'm concerned about water leaking everywhere when I disconnect the hoses. How much water should I expect, and how do I minimize the mess?

Expect some residual water (1-2 cups) from the supply line and the dishwasher's sump. Place towels and a bucket directly under the connections before loosening them. Work quickly and have extra absorbent towels, like the WYPALL L40, ready.

Transcript
Hide

Now at this point, we can lift the whole cabinet away from the back, tilt it slightly forward, lifting up so that we clear the water inlet. And if you wish you can raise the lid and grasp the inside edge of the tub opening, lift it off the front of the washer and set it aside. Now if there's still water in that hose, we'll need a container here.

Auto-generated transcript. May contain errors.