stesso

Project

Begin by shutting off the water supply to the toilet. The shutoff valve, also known as an angle stop, is typically located on the wall or floor behind the toilet. Turn the handle clockwise until it is fully closed. Next, flush the toilet and hold the handle down to drain as much water as possible from the tank and bowl. Use a sponge or a wet/dry vacuum to remove any remaining water from both the tank and the bowl to prevent spills during toilet removal.

You're viewing a step from: How to Remove an Old Toilet Flange

Intermediate

30 minutes

2/4 Inventory

This guide provides comprehensive, step-by-step instructions for removing an old toilet flange. The process includes preparing the workspace, removing the existing toilet, cleaning the area, and then detaching and removing the flange from the drain pipe and subfloor. Specific techniques for both common PVC/ABS and more challenging cast iron flanges are detailed.

Based on content fromDIY•BRY· 7K subscribers

Frequently Asked Questions

How difficult is it to remove an old toilet flange, and how long should I expect it to take?

Removing an old toilet flange is generally considered an intermediate-difficulty DIY project. Expect it to take 2-4 hours, though this can vary significantly based on your experience, the flange material (cast iron is more challenging), and how easily the old fasteners come out. Patience and the right tools are key.

What are the essential safety precautions I need to take when removing a toilet flange?

Safety is paramount for this project. Always wear safety glasses and work gloves to protect against debris and sharp edges. Ensure the water supply is shut off and the toilet is completely drained before beginning. If working with cast iron, be cautious of flying fragments and use appropriate hearing protection when chiseling.

Do I absolutely need specialized tools like an inside pipe cutter or a cold chisel and sledgehammer for this project?

Yes, for PVC/ABS flanges, an inside pipe cutter (like The Plumber's Choice 1242R) is highly recommended to make a clean, safe cut without damaging the main drain pipe. For cast iron flanges, a cold chisel (e.g., Dasco Pro G419) and sledgehammer (like Estwing MRF3LB) are often necessary to break the brittle material without damaging the subfloor or surrounding pipe.

What's the most common mistake DIYers make when removing a toilet flange, and how can I avoid damaging the drain pipe?

The most common and costly mistake is damaging the drain pipe itself while removing the flange. To avoid this, always exercise caution and precision. When cutting PVC/ABS, ensure the inside pipe cutter is properly adjusted to cut only the flange. When breaking cast iron, direct your force carefully with the chisel to fracture the flange, not the underlying pipe or subfloor.