Skip to main content
Stesso
Project

Prime the PF-2 Filter — Flush the New Water Filter

Beginner45 mins

Part of project

How to Replace a Faucet-Mounted Water Filter: A Step-by-Step Guide · Step 6 of 6

Helpful?

In this video

Place the included tan priming button over one of the openings on the filter. Press the filter and button firmly against your kitchen faucet to create a tight seal. Turn on the cold water to a medium flow, forcing water through the filter. Continue this for one to two minutes, or until the outside of the filter begins to 'sweat' or show beads of water. Turn off the water, flip the filter, and repeat the process from the other end. This flushes out any residual manufacturing dust.

Goal: Rinse out manufacturing dust

  • The goal is to push water through the filter to rinse out any manufacturing dust.
  • Ensure you have a good seal against the faucet so that water goes through the filter and not around it.
  • Prime the filter from both ends for approximately 1-2 minutes each.

Used in this video

  • Kitchen Faucet (brand: Unspecified) — Providing pressurized water for priming.
78.9K views3162-4 minutes
iSpring Water Systems

14K subscribers

View Channel

FAQs

How difficult is it to replace a faucet-mounted water filter for a beginner, and how long should I expect it to take?

This project is designed for beginners and is relatively straightforward. Most individuals can complete the filter replacement in about 45 minutes. Having your materials and understanding the steps beforehand will help keep the process quick and smooth.

What's the most critical safety step, and what should I do if I can't find a shut-off valve under my sink?

The most critical step is to shut off the water supply to prevent flooding and messes. If there isn't a dedicated shut-off valve for the sink, you'll need to turn off the main water supply to your entire home. Always keep towels handy to manage any residual water or small drips.

I've installed the new filter, but I'm seeing leaks. What should I troubleshoot?

Immediately turn off the water supply again. Carefully check that the filter cartridge is seated correctly and the housing is tightened snugly, but not overly so. Sometimes, the O-ring might be dislodged or dirty; ensure it's clean and properly aligned before re-tightening.

Do I need any special tools for this water filter replacement project?

For most faucet-mounted water filter replacements, no specialized tools are required, just your hands for twisting the housing. However, it's wise to have towels or a small basin ready for inevitable drips. Some stubborn housings might benefit from a filter wrench, often supplied with the new filter.

Transcript
Hide

filter now take the tan priming button that came with your filters place on top of one of the holes and use that to create a seal against the faucet the idea here is to push water through the pf2 filter to rinse any manufacturing dust that is collected inside the filter during production you will want to see water coming out the other end do this for approximately 1 to 2 minutes and do it for both sides again make sure you have a good seal that the water is going through the

Auto-generated transcript. May contain errors.