Skip to main content
Stesso
Project

Remove Old Filter (Internal Compartment) — Remove the Old Water Filter

Beginner45 mins

Part of project

How to Replace a Faucet-Mounted Water Filter: A Step-by-Step Guide · Step 3 of 6

Helpful?

In this video

Open the filter housing door. Swing the old filter cartridge all the way to the right until it comes to a complete stop. The filter will not release unless it is fully swung to this position. Once it stops, gently pull the old filter cartridge straight out of the housing. It is important not to twist the cartridge during removal.

Goal: Remove the old filter from the interior housing

  • Do not twist the cartridge.
  • The filter must be swung all the way to the right to release.
437.8K views56630 seconds
iSpring Water Systems

14K subscribers

View Channel

FAQs

How difficult is it to replace a faucet-mounted water filter for a beginner, and how long should I expect it to take?

This project is designed for beginners and is relatively straightforward. Most individuals can complete the filter replacement in about 45 minutes. Having your materials and understanding the steps beforehand will help keep the process quick and smooth.

What's the most critical safety step, and what should I do if I can't find a shut-off valve under my sink?

The most critical step is to shut off the water supply to prevent flooding and messes. If there isn't a dedicated shut-off valve for the sink, you'll need to turn off the main water supply to your entire home. Always keep towels handy to manage any residual water or small drips.

I've installed the new filter, but I'm seeing leaks. What should I troubleshoot?

Immediately turn off the water supply again. Carefully check that the filter cartridge is seated correctly and the housing is tightened snugly, but not overly so. Sometimes, the O-ring might be dislodged or dirty; ensure it's clean and properly aligned before re-tightening.

Do I need any special tools for this water filter replacement project?

For most faucet-mounted water filter replacements, no specialized tools are required, just your hands for twisting the housing. However, it's wise to have towels or a small basin ready for inevitable drips. Some stubborn housings might benefit from a filter wrench, often supplied with the new filter.

Transcript
Hide

placing a small towel underneath the filtered door to capture any dripping water when removing the old cartridge now swing the old filter all the way to the right until it stops the filter will not release until it is in this position then simply pull the old filter out without twisting the cartridge align the

Auto-generated transcript. May contain errors.