Manually Turn Flywheel — Clear Any Jams in the Garbage Disposal
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 4 of 4
In this video
Locate the hexagonal socket in the center of the bottom of the disposal unit. Insert the 1/4 inch Allen wrench into this socket. Apply firm pressure and turn the wrench back and forth. This motion manually rotates the motor and flywheel, which should dislodge or break up whatever is causing the jam.
Goal: Free the jammed motor using an Allen wrench.
Used in this video
- Allen Wrench (brand: N/A, Tool Type: Allen wrench, Power Source: Manual, Material: Metal, Size: 1/4 Inch, Specific Use: Disassembly, Head Type: Hex) — Manually turning the motor flywheel to dislodge the jam.
702K subscribers
FAQs
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
TranscriptHide
Auto-generated transcript. May contain errors.
Manually Turn Flywheel — Clear Any Jams in the Garbage Disposal
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 4 of 4
In this video
Locate the hexagonal socket in the center of the bottom of the disposal unit. Insert the 1/4 inch Allen wrench into this socket. Apply firm pressure and turn the wrench back and forth. This motion manually rotates the motor and flywheel, which should dislodge or break up whatever is causing the jam.
Goal: Free the jammed motor using an Allen wrench.
Used in this video
- Allen Wrench (brand: N/A, Tool Type: Allen wrench, Power Source: Manual, Material: Metal, Size: 1/4 Inch, Specific Use: Disassembly, Head Type: Hex) — Manually turning the motor flywheel to dislodge the jam.
Frequently Asked Questions
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
Video Transcript
(269 characters)Hide
Video Transcript
(269 characters)Transcript may be auto-generated and contain errors.