Final Test and Further Troubleshooting — Inspect the Garbage Disposal's Power Supply
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 3 of 4
In this video
After removing the obstruction, plug the disposal's power cord back into the outlet. Flip the wall switch to test its operation. If it still doesn't work (either no power or it continues to hum), and you have verified that the main circuit breaker in your home's electrical panel has not tripped, the disposal unit has likely failed and will need to be replaced.
Goal: Confirm the repair or determine if replacement is needed
- If the blades move freely with the hex wrench but the motor still only hums, the motor itself is likely burned out.
702K subscribers
FAQs
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
TranscriptHide
Auto-generated transcript. May contain errors.
Final Test and Further Troubleshooting — Inspect the Garbage Disposal's Power Supply
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 3 of 4
In this video
After removing the obstruction, plug the disposal's power cord back into the outlet. Flip the wall switch to test its operation. If it still doesn't work (either no power or it continues to hum), and you have verified that the main circuit breaker in your home's electrical panel has not tripped, the disposal unit has likely failed and will need to be replaced.
Goal: Confirm the repair or determine if replacement is needed
- If the blades move freely with the hex wrench but the motor still only hums, the motor itself is likely burned out.
Frequently Asked Questions
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
Video Transcript
(296 characters)Hide
Video Transcript
(296 characters)Transcript may be auto-generated and contain errors.