Reset the Garbage Disposal — Reset the Garbage Disposal's Overload Protector
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 2 of 4
In this video
Locate the reset button on the underside of the garbage disposal unit. This button is an overload protector. If you find that the button is protruding or has popped out, it means the circuit has been tripped. To reset it, firmly press the button back in until it clicks and sits flush with the casing. If the disposal still doesn't work or makes a humming sound, proceed to the next step.
Goal: Press the reset button
- The reset button is typically small and red or black. You may need a flashlight to locate it under the sink.
702K subscribers
FAQs
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
TranscriptHide
Auto-generated transcript. May contain errors.
Reset the Garbage Disposal — Reset the Garbage Disposal's Overload Protector
Part of project
Troubleshooting a Garbage Disposal: Won't Turn On After Reset · Step 2 of 4
In this video
Locate the reset button on the underside of the garbage disposal unit. This button is an overload protector. If you find that the button is protruding or has popped out, it means the circuit has been tripped. To reset it, firmly press the button back in until it clicks and sits flush with the casing. If the disposal still doesn't work or makes a humming sound, proceed to the next step.
Goal: Press the reset button
- The reset button is typically small and red or black. You may need a flashlight to locate it under the sink.
Frequently Asked Questions
Why is turning off the power at the circuit breaker the very first step, even if the disposal seems dead?
Disconnecting power at the breaker is critical for safety to prevent electrical shock. Even a 'dead' disposal can still be live, especially if it's an electrical issue. Always verify the power is off by attempting to turn the disposal switch on after flipping the breaker.
What if the reset button on my disposal keeps tripping immediately after I press it?
If the reset button trips right away, it usually indicates a severe jam or an internal motor issue. Ensure the flywheel is completely free to move by rotating it with a hex key, then try again. If it still trips, the motor might be burned out, requiring professional service or replacement.
Do I need the specific high-powered flashlight and hex key set mentioned, or can I use other tools?
While the recommended NITECORE flashlight and Eklind hex key set are excellent for the job, any standard flashlight will help you see under the sink. For clearing jams, a general hex key or Allen wrench of the correct size (usually 1/4 inch or 6mm) that fits snugly into the center hole on the disposal's bottom will work.
How can I confirm if my power outlet or circuit breaker is the real issue, rather than the disposal itself?
To test the outlet, plug in a small, known-working appliance like a lamp or phone charger. If it doesn't work, check your home's circuit breaker panel to see if the breaker for that circuit has tripped. If other items on the same circuit also don't work, the breaker is likely the culprit.
Video Transcript
(327 characters)Hide
Video Transcript
(327 characters)Transcript may be auto-generated and contain errors.