Skip to main content
Stesso
Project

Remove handle — Remove the Shower Faucet Handle

Beginner3 hours

Part of project

Delta Shower Faucet Valve & Handle Replacement: A Step-by-Step Guide · Step 2 of 7

Helpful?

In this video

Use an Allen wrench to remove the screw holding the handle in place. Carefully pry off the decorative cap covering the screw with a small screwdriver or a sharp pick. Gently lift the handle off the faucet.

Goal: Access internal faucet components.

  • Be careful not to scratch the faucet finish when removing the handle. Use metric Allen wrenches if standard sizes don't fit.

Used in this video

  • Allen wrench (Allen Wrench/Hex Key: Various sizes) — Removing the handle screw
  • Screwdriver (Screwdriver_Type: Flathead) — Removing the cap
102.1K views5715 minutes
YoloReviews

3K subscribers

View Channel

FAQs

What if my old shower faucet cartridge is stuck and won't come out?

First, double-check that all retaining clips or nuts have been completely removed. If it's still stuck, try gently wiggling or rotating the cartridge with pliers or a cartridge puller to break its seal. A small amount of penetrating lubricant can help, but apply it carefully to avoid damage to the valve body or new seals.

I've turned off the water supply, but the shower still drips. What should I do before proceeding?

Ensure you've turned off the correct water supply valves, ideally both hot and cold lines leading to the shower, or the main house shut-off valve. If it continues to drip, your shut-off valves may be faulty and need repair or replacement themselves before you can safely work on the shower faucet.

Is this project genuinely suitable for beginners, and how long should I realistically expect it to take?

Yes, this project is considered beginner-friendly as it primarily involves basic disassembly and reassembly. While the estimated time is 3 hours, a careful beginner should allow a bit more time, especially if the cartridge is stubborn or if they need to locate the main water shut-off. Take your time and follow each step.

Do I need a specific Delta replacement cartridge, or will any universal cartridge work?

It is crucial to use a genuine Delta replacement cartridge or an exact aftermarket equivalent specifically designed for your Delta faucet model. Universal cartridges rarely fit perfectly and can lead to leaks, improper water flow, or difficulty controlling temperature. Always match the model number of your existing cartridge or faucet for the best results.

Transcript
Hide

just to be safe um i need two allen wrenches i actually had to go and buy some metric ones um so i needed uh three and a two and a half so hopefully those will work for you as well um the way that this is gonna work is we're gonna come over here and right underneath here you can kind of see this uh this little like sticker thing um plug maybe and we're gonna just kind of use a small um i got a little jeweler set screwdriver to help me get that out i'm just going to very gently so i don't scratch the black um kind of pop that out all right so i got that that little piece out it's a little black thing um and if you look back in there you'll see that there's a little tiny screw and this is where your two and a half allen wrench is going to work so i'm just going to get that back in there and pull that screw out screws out so i'm just going to lift gently on the handle here it'll pop right off you can see that the screw kind of fell right in there so i'll get that out i can there we go and here's the top of your

Auto-generated transcript. May contain errors.