Skip to main content
Stesso
Project

Isolate Water Supply — Shut Off the Shower's Water Supply

Beginner3 hours

Part of project

Delta Shower Faucet Valve & Handle Replacement: A Step-by-Step Guide · Step 1 of 7

Helpful?

In this video

Locate the water shut-off valve for the shower. This might be an isolation valve located near the shower itself. If you cannot find a dedicated isolation valve, you will need to turn off the main water supply to the entire house using the main stopcock. It is critical to ensure the water is completely off before proceeding.

Goal: Shut off water to the shower

  • If you shut off the main stopcock, make sure no one else in the house needs to use the water while you are working.
609.9K views3.2K10 minutes
YoloReviews

3K subscribers

View Channel

FAQs

What if my old shower faucet cartridge is stuck and won't come out?

First, double-check that all retaining clips or nuts have been completely removed. If it's still stuck, try gently wiggling or rotating the cartridge with pliers or a cartridge puller to break its seal. A small amount of penetrating lubricant can help, but apply it carefully to avoid damage to the valve body or new seals.

I've turned off the water supply, but the shower still drips. What should I do before proceeding?

Ensure you've turned off the correct water supply valves, ideally both hot and cold lines leading to the shower, or the main house shut-off valve. If it continues to drip, your shut-off valves may be faulty and need repair or replacement themselves before you can safely work on the shower faucet.

Is this project genuinely suitable for beginners, and how long should I realistically expect it to take?

Yes, this project is considered beginner-friendly as it primarily involves basic disassembly and reassembly. While the estimated time is 3 hours, a careful beginner should allow a bit more time, especially if the cartridge is stubborn or if they need to locate the main water shut-off. Take your time and follow each step.

Do I need a specific Delta replacement cartridge, or will any universal cartridge work?

It is crucial to use a genuine Delta replacement cartridge or an exact aftermarket equivalent specifically designed for your Delta faucet model. Universal cartridges rarely fit perfectly and can lead to leaks, improper water flow, or difficulty controlling temperature. Always match the model number of your existing cartridge or faucet for the best results.

Transcript
Hide

and buy a new unit to attach to the wall. The first thing to do is find the isolation valve that cuts the water supply to the shower and turn off. You don't want water pumping out all of you when you take the unit off the wall. If you can't find the isolation valve because it's hidden under the bath or something like that, your second option is to turn off the main stock cock in the house, but make sure nobody else needs the water supply while you're doing the work. Otherwise, you've got it. Before we take the unit off the wall, I'm going to disconnect the shower hose and

Auto-generated transcript. May contain errors.