Skip to main content

System Activation and Final Checks — Perform System Startup and Initial Checks

Beginner

Part of project

Professional Installation Recommendation · Step 5 of 5

Helpful?

In this video

After the vacuum and leak test are complete and verified, release the refrigerant into the system by opening the service valves. The technician ensures the system is properly charged by monitoring the pressure and temperature. The new outdoor units are turned on, with the technician confirming quiet operation and efficient discharge. The indoor units are also checked for proper function. Finally, the homeowner's smart thermostat is adjusted to the desired settings, demonstrating the full functionality of the new ACiQ heat pump systems.

4.4K views193
Transcript
Hide

straight. Okay, good. Perfect. I just need to get it in there. Right around there, and Okay, so that I made too long. So, let's Come on, you don't use your thumb all day long to mark the pipe? You know you all do. Where's my tubing cutter? >> >> I I it's right in front of my face I don't even see it. Only over there. What is it doing only over there? Okay, so this is going to connect to that 3/8 ZoomLock coupling going inside the house to the evaporator. Cool. Now let's put you

Auto-generated transcript. May contain errors.