Skip to main content
Stesso
Project

Insert LED Strip into Channels — Install LED Strips into Channels

Beginner8 hours

Part of project

How to Install Aluminum-Channel LED Lighting on Stair Nosings · Step 3 of 7

Helpful?

In this video

Once the aluminum channels are securely in place, proceed to insert the prepared LED strip. Carefully press the LED strip into the groove of each aluminum channel. The design of the strip and channel allows for a perfect fit, creating a seamless and flush appearance within the panel system. Ensure the strip is fully seated and evenly distributed along the channel's length.

8.1K views33
Transcript
Hide

can be cut anywhere along its length. After cutting, seal the end with silicone glue and apply a black cap for weather protection. Step one, install the aluminum channels between the slats using the included screws. Step two, insert the LED strip. It fits perfectly inside the channel. Step three, drill a hole in the panel and feed the wire through. Connect to power following proper outdoor lighting guidelines. Accent light LED strips are fully waterproof, safe, and built for outdoor

Auto-generated transcript. May contain errors.